<noframes id="zdnlf"><address id="zdnlf"></address>

<noframes id="zdnlf"><listing id="zdnlf"><listing id="zdnlf"></listing></listing>
    <address id="zdnlf"><address id="zdnlf"></address></address>

      <sub id="zdnlf"></sub>

      <listing id="zdnlf"><listing id="zdnlf"></listing></listing>

        <sub id="zdnlf"><listing id="zdnlf"></listing></sub>

        <noframes id="zdnlf">

        <noframes id="zdnlf">
        <sub id="zdnlf"></sub>

        <form id="zdnlf"></form>

        <sub id="zdnlf"></sub>
        <sub id="zdnlf"></sub>

        <sub id="zdnlf"><listing id="zdnlf"><menuitem id="zdnlf"></menuitem></listing></sub><listing id="zdnlf"></listing>

          <sub id="zdnlf"></sub>

          2021年9月—打包系統/Packing system FAS480


          一、概述


          通過設置和預分類,以及降低輸出皮帶的速度,使打包折疊紙盒變得更容易。

          For easy packaging of folding cartons by setting up and pre-sorting the carton layers and outputting at reduced speed.


          二、結構簡介


          適用于與紙盒上膠機的組合:

          – 配有導向桿,可以控制從上膠機流入的紙箱流
          – 配有速度傳感器,可以保證設備的運行速度與上膠機同步運動
          – 完整供應,包括配重,多款阻擋支架、長盒子用的導向輥輪

          – 配有轉向組件, 通過他,被立起的紙箱流以90°角進入橫向輸送組件
          – 橫向運輸組件,包括側導向,運輸皮帶和隨紙箱流動的停止位
          – 包含驅動電機和控制柜,設備內部220 V,A.C.,50Hz的電氣安裝

          Suitable for combination with Cartons Gluers comprising of:
           – one guide bar to control the carton stream of cartons coming from the Gluer
          – one speed sensor, which ensures that the system runs in synchronisation with the Gluer
           – one errection including belts, spring loaded and adjustable reversing rollers, as well as guides for the erection of the flat carton

          – one revering head section, by means of which the erected stream of cartons is transported at 90 degrees into the cross transport section, whilst remaining the pre-selected counting in the Gluer
          – one cross transport section with side guides as well as driven transport belts and a end stop, which moves along with stream of carton as they arrive
          – one drive and control cabinet including electrical in-machine installation for 220 Volt, A.C., 50 Hz


          三、技術參數

          四、可選項

          可選配套方案:升降臺
          升降臺作為FAS 480的可選項,因其采用氣動控制,可以使得紙盒裝進包裝箱這一操作更加容易。升降臺由高度可調的鋼管框架和工作臺組成,其中一段臺面傾斜35度,可通過腳踏開關(5.5 bar)抬至桌面水平。整個系統可以在通過輪子移動,可以提供左手或右手操作模式。

          Optional lifting table
          As an option for the FAS 480 we offer a pneumatically controlled lifting table, which makes packing of the cartons into the outer box much easier. The lifting table consists of a height adjustable steel pipe frame with formica covered table, of which a section is tilted by 35 degrees and can be raised level by means of a foot switch (5.5 bar). The complete system is movable on wheels and can be supplied as al left-handed or right-handed model

          ?
          久久avwww_老少HD牲交_日本三级香港三级人妇三_91香蕉国产在线观看免费